Lincoln Remote Start Not Working

Lincoln Remote Start Not Working (Troubleshooting Guide)

If you’re reading this article, you’re probably frustrated over your Lincoln remote start failing to work. This can be quite inconvenient, especially in those cold winter months when you want to warm your seats before you get in your car. This guide will help you troubleshoot and resolve the issue of your Lincoln remote start system malfunctioning.

Lincoln remote start not working have many potential causes including a drained key fob battery, low car battery, activated deep sleep mode, issues with your vehicle security system, faulty or missing hood switch, check engine light, disabled remote start, or a faulty remote system.

Below, we’ll delve into all the potential causes behind your Lincoln remote start not working and guide you through the steps for troubleshooting each problem. Whether your remote start only works sometimes or just closes/opens the doors but doesn’t start the engine, you’ll find a solution to your problem in this article.

Why Lincoln remote start is not working

Why Lincoln remote start is not working

The following are all the most common causes for your Lincoln remote start system to malfunction:

A weak or dead key fob battery

When your remote start malfunctions, the number one culprit to consider is drained key fob batteries. Yes, that key chain remote control on your keychain takes in batteries.

These batteries become weak after some time and eventually go dead—rendering the remote non-functional.

Solution: Get a new replacement battery for your key fob from your local auto parts store.

And ensure you get the correct type of battery for your key fob. Also, ensure you correctly install it in its compartment in the key fob.

Drained car battery

Another common reason for the remote start feature malfunctioning is a drained car battery. This usually happens when your car has power-draining features that end up draining your battery.

Thus, it’s unable to provide power to the remote start function. Your car battery may also be dying and unable to store charge, which will also affect the remote starter.

Drained car battery

Solution: Test your car battery to see if it has a sufficient amount of charge. If the battery is drained, try jumpstarting it or recharging it with a booster pack.

If the battery is fine, check its connections and terminals for loose wiring or corrosion that could be restricting current flow to the remote start and other electrical systems in your car.

Also, have your car checked for any issues that may be draining the battery power.

Deep sleep mode is active

If you’re having trouble remote starting your vehicle, then you may also want to consider checking if the Deep Sleep Mode in your car is activated.

As you may already, this mode is usually designed to help conserve your car battery power. It simply shuts off non-critical power drains, including the ability to remote start your car.

In so doing, it helps save as much battery power as possible and ensures your car can start when necessary.

Lincoln Deep sleep mode is active

Solution: Check if this sleep mode is activated in your car. The factors likely to make your car enter deep sleep mode include the vehicle being inactive for 14 days consecutively, extremely hot or cold weather, and the battery voltage dropping below 9.5V.

If your car is in this mode, waking it will require you to start it manually and not via remote start.

The ignition is on

Your Lincoln remote start is also likely to misbehave if your car ignition is on. If the ignition switch is in the ON position, then remote start assumes your car is already turned on and fails to engage.

Solution: Ensure your ignition is in the “OFF” position and then attempt to remote start your car to see if it works this time.

Out of range and obstructions

Sometimes you may be operating your Lincoln remote start feature out of range. This can weaken the signal reaching the car or affect smooth communication between your key fob and the car—making your car fail to respond to remote start.

Likewise, if there are any physical barriers between you and your car, e.g. trees, walls, other vehicles, etc., they may serve as obstructions of the car signal.

Lincoln Remote Out of range

Solution: If you’re too far away from your car, consider moving closer so that you’re within the recommended operating range, and then retry the remote start.

Ensure there are no obstacles on your way that could be blocking the signal from reaching your car and turning the engine on.

Alarm system/security system is triggered

If the security system of your car is armed, it will also disable your remote start system. The alarm system helps prevent unauthorized access to your car.

Therefore, if someone tries to enter your car without your permission, security will be triggered.

Sometimes the system may be malfunctioning due to issues with its sensors. This can also cause the system to activate.

In either of these cases, the alarm system coming on is usually configured to automatically disable the remote start system.

Solution: Check whether the security system is activated by looking for a flashing security light on your dash. If it’s illuminating, you’ll need to disarm it correctly.

Consult your user manual for the correct procedure for disarming the system.

If you suspect your security system has underlying issues, it’s best to have it diagnosed and fixed by your mechanic.

Incorrect use

If your car isn’t responding to your key fob, then you may also be using the wrong activation procedure on your key fob.

Most people forget to press the lock button first (even if your car is already locked) and go straight to pressing the start button. Unfortunately, this will not start your engine!

Lincoln Remote Incorrect use

Solution: Make sure you follow the correct activation procedure outlined in your user manual for activating your remote start.

Ideally, you should press the lock button first and then press the start button twice to remotely start your car.

Faulty or missing hood switch

This is probably one of the most common culprits causing remote start failure in Lincolns. Most remote start systems come with a hood sensor, usually installed under your car hood.

The work of this component is to ensure that the hood is properly closed. If the hood is up, it stops the remote start from turning on your engine as a safety precaution.

If this sensor is missing or malfunctioning, it may cause your remote starter to malfunction even when the hood is properly closed.

Solution: Inspect the hood pin switch condition. Does it look rusty? If yes, try applying wd40 on it to see if it will resume its functionality.

If the switch is damaged or missing, then you’ll need to replace it with a new one. This is an easy DIY task and you can do it on your own.

Check engine light is on

If your check engine light (CEL) is illuminating, it will also disable your remote start system. The CEL disarms your remote start as a safety measure as CEL means there’s an issue with your vehicle engine or emission system.

Disabling the remote start helps potentially prevent engine damage and ensure your vehicle doesn’t produce excessive emissions.

Check engine light usually serves as a warning that your onboard vehicle computer has detected an issue with your car engine or emission control system.

The issue can be something as simple as a loose or missing gas cap or something more complex, like an engine misfire!

Lincoln Check engine light is on

Solution: If you can see the check engine light illuminating your dashboard, then you just found the culprit causing your remote start malfunction.

However, it can be hard to tell what triggered the CEL, so we advise you to have your car computer diagnosed for any stored trouble codes that could have activated the warning light.

You can check the codes to find what issue you’re dealing with. Resolving this issue will then clear the CEL and revive your remote start function.

The remote start feature is disabled

Another thing to check is your dashboard menu on whether the remote start function in your car has been disabled. If yes, this system will simply cease functioning.

Lincoln Remote start feature is disabled

Solution: Check if the remote start feature has been disabled on your dash display. You can select the settings on the dash by using the steering wheel left-side controls.

Go to Settings > Vehicle > Remote Start Menu. If it reads deactivated, simply enabled it and then try remote starting your Lincoln.

Faulty remote start system

If all the above potential culprits check out, your remote start could be faulty, and hence the reason it’s malfunctioning. The key fob itself could be failing/damaged, thus sending no signals to your car.

The remote control module in your car could also be having wiring problems and thus unable to respond to the key fob and start your vehicle engine.

Solution: You can inspect your key fob for signs of damage or loose buttons. Try using your backup key fob to remote start your car. If it works, it means your current fob is faulty and needs a replacement.

For the remote control module, you may want to hire a reliable mechanic or your dealership to inspect it and its wiring for faults and fix it as necessary.

Why your Lincoln key fob remote start is not working

If your key fob isn’t working, the first thing to check is whether the battery needs replacement. If the battery is okay, ensure the battery contacts are rust-free and not loose.

If you recently replaced the key fob battery, then you may want to check if you used the correct type of battery and whether you installed it correctly.

Moreover, you want to make sure you bought high-quality batteries that won’t die out soon.

Why your Lincoln key fob remote start is not working

If the battery is good, check whether you’re using the correct procedure when operating your key fob (i.e., first press the lock button, before pressing the start button twice).

Check whether the key fob has any signs of damage or loose batteries that could be causing it to malfunction. You can try using your spare key fob to help you confirm if your current fob is faulty.

If you suspect your key fob is faulty, have it checked and fixed by a qualified auto technician, or simply replace it with a new one.

Why is your Lincoln remote start via the App not working?

If your remote start via the Lincoln Way® isn’t working, follow the troubleshooting below to help you fix the issue:

  • You first want to check if you logged into the app using the correct username and password.
  • Next, check whether your car is in deep sleep mode.
  • Check whether the remote start feature is enabled on your instrument cluster
  • Confirm that your hood and trunk are properly closed
  • Check if the check engine light is off. If on, clear it to use the remote start

If none of these troubleshooting tips resolves the issue, contact your mechanic or dealership for further assistance.

Why is your Lincoln remote start via the App not working
In your journey to understand the intricacies of Lincoln’s remote start system, it’s noteworthy that cars, both premium and economical, encounter similar challenges. The Chevy Sonic, for instance, a compact car known for its versatility, faces its own remote start hitches. Dive deeper into its complexities through our article on Chevy Sonic remote start issues. Additionally, the Cadillac Escalade, a symbol of luxury in the SUV segment, isn’t without its quirks. Our comprehensive guide on Cadillac Escalade remote start problems provides a detailed exploration into its specific challenges.

Conclusion

Your Lincoln remote start not working is a common occurrence that has many potential causes. These include a weak/dead key fob battery, drained car battery, activated deep sleep mode, malfunctioning hood switch sensor, activated check engine light, range and obstruction problems, ignition turned on, active security system, or even a faulty remote start system.

Follow the troubleshooting tips we have discussed for each of these issues in the above guide to help you diagnose and fix your remote start. Start with basic issues like key fob battery, range issues, obstacles, etc. before diagnosing the system for complex issues. If you’re unable to diagnose your car, consult a professional for further assistance.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *