Honda Civic Not Starting No Clicking Noise (Causes & Fixes)
If your Honda Civic won’t start and there’s no clicking noise when you turn the key in the ignition, you may be looking for answers about why this is happening. This guide will enlighten you on what causes this problem and how to fix it.
Honda Civic not starting and no clicking noise is mainly caused by a bad starter motor or starter solenoid. Other potential causes include a weak or dead battery, poor battery connections, bad ignition switch/key, fuel system issues, blown fuses, wiring problems, or issues with the ECU.
In this article, we’ll discuss all the potential causes for your Honda Civic failing to start and producing no clicking noise. We’ll also discuss helpful tips on how to diagnose and fix the starting troubles with your vehicle.
Honda Civic not starting no clicking noise causes

Your Honda Civic may fail to start and at the same time produce no clicking noise due to the following reasons:
Weak or dead battery
One of the key culprits to consider if your Honda won’t start and makes no clicking sound is a weak battery or one that’s dying slowly.
As you already know, the battery is a crucial part of your vehicle’s electrical system and provides the power necessary to start and run your engine.
However, if the battery is discharged or dead, it’s unable to provide sufficient power to start your car or start other components like the starter solenoid (which is the source of the clicking sound).
This may be the reason you won’t even get a clicking sound.
You can easily tell if a battery is dead by looking for key signs such as flickering lights on your dash, dimming headlights, etc.

Bad battery connections
Sometimes the battery may be in good working condition but it may have poor connections, which restrict electricity flow to your vehicle starting components.
Common connection issues include broken wires, loose connections, or corroded battery terminals.
All these will affect the flow of electric current from the battery to the starter motor and other necessary starting components. This makes your engine fail to start or produce any clicking sound.
Bad starter motor
Another potential cause for your Honda Civic’s failure to start and no clicking sound is a failing starter motor. The starter’s job is to turn over your engine when you turn on the key.
If it becomes damaged or faulty, it’s unable to crank your engine, resulting in a no-start situation.
If you have ruled out issues like a dead battery and faulty ignition switch, then you likely have a faulty starter motor.

Fault starter solenoid
The starter solenoid is the source of the clicking sound, so if it’s faulty, you’ll hear no sound when you try to start your Honda Civic.
This solenoid is usually connected to your starter motor as well as the battery.
It engages the starter when you turn the key in the ignition. If faulty, it’s unable to send electric current from your car battery to the starter motor—resulting in the engine failing to start and lack of clicking sound.
To confirm if your starter solenoid could be a problem, issues like a dead battery and faulty wiring should first check out.
Faulty ignition switch
The ignition switch failing is also a potential culprit behind your Honda Civic failing to start.
As you may already know, this switch usually initiates your engine starting process by sending an electrical signal to the starter motor.
However, if it gets faulty or worn out, it won’t be able to engage your starter motor, making the engine fail to turn on when you turn the key in the ON position.

Faulty fuel system
If your engine is turning but won’t start, your vehicle could be experiencing fuel system issues. This may also fail to start and produce no clicking noise.
Fuel system issues can be as simple as insufficient amount of fuel to more complex issues like a malfunctioning fuel pump, clogged fuel filter, or a faulty fuel injector that restrict fuel flow needed to start the engine.
Wiring issues
Any existing wiring problems in your Honda Civic may also make it fail to start and at the same time produce no clicking noise.
Wiring issues simply disrupt the proper current flow to essential components of your vehicle like the ignition system or starter motor, preventing your engine from starting.
These issues can be in the form of faulty or damaged wires, loose connections, or even corroded wiring harnesses.

Blown fuses
Sometimes the reason your vehicle won’t start could be caused by something as simple as a blown fuse(s). The fuses in your vehicle help protect various electrical circuits from damage caused by electrical faults or power surges.
If a fuse related to your vehicle’s starting components is blown, it may prevent the necessary power from reaching crucial components like the ignition switch, starter motor, etc., causing a no-start situation.
Engine immobilizer issues
All Civics come equipped with an immobilizer system which helps ensure maximum safety and theft protection for your vehicle.
As part of vehicle security, this system may also prevent your engine from starting or making a clicking sound if it doesn’t recognize a key or if it’s faulty.

Issues with the ECU
If your Honda Civic ECU (engine control unit) develops any issues, it may also stop your vehicle from starting and producing clicking sounds. The unit controls crucial engine functions like emissions, fuel injections, ignition timing, etc.
Thus, if it malfunctions, it will disrupt the communication and operation of various essential engine components/systems, preventing your engine from starting.
How to fix Honda Civic not starting no clicking noise

Now that you know all the potential causes of your Civic not starting or making clicking sounds, let’s discuss how you can diagnose and fix this issue below:
Check the battery connections: Ensure your battery terminals are corrosion-free, clean, and tight. Fix any loose or corroded connections that may be restricting the power flow necessary for starting your engine. Replace any damaged cables as well.
Test the battery voltage: If the battery connections are fine, you’ll need to test the battery voltage. A healthy, fully charged battery should read around 12.6V or higher. If the voltage reads too low, then your battery may be discharged and needs to be recharged (jump-started) or even replaced if it’s damaged.
Inspect the ignition switch: Now test whether the ignition switch is in good working condition. Try turning the key ON and see if the dash lights illuminate. If they do but the engine fails to turn over, your ignition switch could be faulty and needs replacement by a qualified auto technician.
Starter solenoid: if you suspect a faulty starter solenoid, have it inspected and replaced by a qualified auto mechanic.
Test the motor: If your battery and ignition switch are in good working condition, then you should check the starter motor. You may want to consider getting a qualified auto mechanic to diagnose your motor and replace it if necessary.
A temporary fix for a failing motor involves tapping it with a hammer or any other piece of metal.
Check the video below on how to fix your car’s starter with a hammer:
Video:
Examine the fuses: Inspect if your Civic fuse box has any blown fuses. Pay attention to the fuses related to the starting system of your vehicle. Any blown fuses should be replaced with new ones bearing the same amperage to see if it helps fix the issue.
Check fuel level: Ensure your gas tank has a sufficient amount of fuel. If not, top it up as necessary to see if it helps with the problem.
Check the fuel system: Now inspect your fuel system. Ensure the fuel pump and fuel injectors are functioning correctly and that your fuel filter isn’t clogged. For fuel system issues, we suggest getting a qualified mechanic to diagnose the system for any issues and perform the necessary repairs or replacements to restore the proper functionality of your Civic fuel system.
Inspect wiring and connections: Examine your vehicle wiring harness and connections for any signs of damage or corrosion that could be disrupting the electric flow. Tighten and secure any loose electrical connections. Replace any faulty wiring and clean any corroded connectors to see if it helps fix the no-start problem.
Consider ECU diagnosis: If everything else checks out, then you may consider getting a qualified mechanic to perform a diagnosis c scan and identify any potential ECU issues and fix them as necessary.
If you’re unable to find the culprit behind your Honda Civic not starting and making no clicking sound, then you may consider consulting your mechanic or your local Honda dealership.
They’ll carry out more in-depth diagnosis and troubleshooting of your vehicle and fix any underlying issues.
Why Honda Civic not starting no clicking noise but has power
In some cases, your Honda Civic may have power but still won’t start and makes no clicking sound. In this case, it means the battery and its connections are fine and we can rule them out.
One potential culprit to consider include a bad ignition switch, which may be unable to send an electrical signal to the starter motor, thus disrupting the starting process.
If the ignition switch isn’t the problem, then you may want to check the starter motor as it could be faulty. A defective starter usually results in silent start attempts.

Other potential issues to consider include blown fuses, wiring problems, engine immobilizer system issues, or even ECU malfunction.
If you’re unable to find the cause for this no-start problem, consult your mechanic or dealership for a more in-depth diagnosis and fixing of any underlying issues.
While Honda Civics are renowned for their reliability, they can occasionally present some challenges. For those who wish to enhance their vehicle experience, understanding the intricacies of the car’s features can be quite beneficial. Dive into our comprehensive guide on how to remote start a Honda Civic for seamless convenience during colder months or simply for pre-conditioning. Additionally, to ensure your car’s maintenance reminders stay up-to-date, our step-by-step tutorial on how to reset the oil life on a Honda Civic is a valuable resource.Conclusion
Your Honda Civic not starting and making no clicking noise can be caused by a variety of issues such as a weak or dead battery, poor battery connections, bad ignition switch, bad starter motor, defective starter solenoid, fuel system issues, blown fuses, wiring issues, engine immobilizer issues, or a malfunctioning ECU.
A thorough diagnosis will help you find out the exact cause of your vehicle’s starting issues. Follow the troubleshooting tips we’ve shared in this article to help you diagnose and fix the underlying issue. If you’re unable to fix your vehicle no-start on your own, get a qualified mechanic or your Honda dealership for further assistance.